A. Cut the pipe.
Use a pipe cutter to cut the pipe into 90 degrees
on the designated mark
B. Insert support sleeve
Remove foreign objects on the cutting surface and insert the support sleeve into the pipe
C. Insert the pipe into connection opening
Hold the pipe opening horizontally and push the pipe in until it reaches its designated mark. (Use grease)
D. Reassembly method
연결이 실패했을 경우 캡을 열고 파이프와 연결구는 완전히
분리하여 재조립시에는 그립링, 와샤, 오링을 순서대로 조립
후 사용한다. 이때 한 번 사용한 그립링은 재활용이 불가능
하므로 반드시 교환하여 조립하여야 한다.
 

   1) Able to use in high temperature for a long period of time while maintaining durability
   2) Do not contaminate water with red and green rust. It may be used clean for a long period of time
   3) With its low friction coefficient compared to steel pipes, its water flow will not decrease over time
   4) Easy to handle and has good workability because it is light and easy to cut

 

Measurements
(mm)
Outer diameter
(mm)
Thickness
(mm)
Manufacturing
length

(m)
Roll
pipe
Straight
pipe
10
10.00±0.1
1.60±0.1
100
5.8
15
15.90±0.1
1.75±0.15
100
6
20
20.10±0.1
2.05±0.15
100
6
22
22.20±0.15
2.27±0.15
100
6
25
25.25±0.15
2.50±0.2
100
6
28
28.05±0.15
2.85±0.25
50
6
35
35.00±0.15
3.35±0.15
-
6
For heating
For hot water suppy